Two post floor plate lift with 12,000 lb. lifting capacity, large twin 3” cylinders with low friction chain rollers, and a “big foot” base plate for extra stability.
LIFT MODEL | TP12KFX |
CAPACITY | 12,000 LBS |
LIFT CONFIGURATION | FLOOR PLATE |
CEILING HEIGHT MINIMUM | 10'6" |
HEIGHT OVERALL | 121-1/2" (9'11-1/2") |
LIFTING HEIGHT | 76.5" (6'4-1/2") |
LIFTING HEIGHT (W/ADAPTERS) | 80" (6'8") |
LOW PAD HEIGHT | 9" |
WIDTH OVERALL | 147-7/8" (12'3-7/8") |
WIDTH BETWEEN COLUMNS | 120" (10') |
TIRE/DRIVE-THRU WIDTH | 107" (8'11") |
ARM ATRICULATION | SYMMETRIC |
FRONT ARM REACH (MIN/MAX) | 37" - 52" |
REAR ARM REACH (MIN/MAX) | 37" - 52" |
ADAPTERS (2 SETS OF 4 INCLUDED) | 3" AND 5" |
MAX. LOAD PER ARM (LBS) | 3000 |
SAFETY LOCKING SYSTEM | DUAL POINT |
POWER PACK (HP-V-A) | 2HP/1PH-220V-20A |
CABLE DIAMETER | 3/8" |
LIFTING SPEED (SECONDS) | 50 |
SHIPPING WEIGHT (LBS) | 2460 |
HYDRAULIC OIL | Non-Detergent / Non-Foaming Hydraulic Oil -- SAE10 / AW32 |
CONCRETE SPEC (PSI) | 3000 Psi |
CONCRETE SPEC (Thickness) | 4.25" |
CONCRETE SPEC (Anchor) | 3/4" X 5-1/2" ANCHORS |
CONCRETE SPEC (Anchor Depth) | 3.25" MIN. ANCHOR EMBEDMENT |
CONCRETE SPEC (Edge) | 7" MIN DISTANCE FROM ANY EDGE |
TP12K-FX Manual: Click Here
Local Pick-up (Reidsville, NC): 12' - 16' (Open) trailer required for pick-up. Enclosed trailers will not be loaded due to risk of damage to loading ramp.
Shipping / Receiving: Offloading of the delivery truck is the responsibility of the customer. A forklift or similar vehicle is required to unload the lift. Residential delivery is an additional $150 charge by the freight carrier.