FREE SHIPPING IN THE CONTINENTAL US
Reclaimer: High performance 600 CFM cyclone type reclaimer separates good media from dust and by products.
Light Box: Two (2) tube 24: fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and reclaim.
Viewing Window: Large 12"X20" tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy-duty cloth lined vinyl gloves are snap-in and quick changing, allowing easy access of handling parts in blast chamber.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean out door: Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Floating foot control.
Doors: Large double walled doors (both sides) for opening size see figure "C". Knife sealing edge assures positive seal in blast chamber.
Motor: 400 CFM, 1/2 HP, 120 VOLTS, 11 AMP, 3450 RPM or 600 CFM, 1 HP, 120 VOLTS, 16 AMP, 3450 RPM.
Dust Collector: D10 DUST COLLECTOR - BLASTING BY-PRODUCTS ARE COLLECTED IN A SERIES OF VERTICALLY MOUNTED, CLOSED END, DUST BAGS SUSPENDED ON A SPRING MOUNTED HOLDER. THE DUST BAGS ARE HOUSED IN A METAL CABINET CONSTRUCTED OF HIGH QUALITY STEEL, WITH A CORROSION RESISTANT ENAMEL FINISH. DUST IS SHAKEN FROM THE BAGS BY A HIGH FREQUENCY VIBRATOR MOUNTED ON THE BAG HOLDER. STANDARD CONTROL OF THE SHAKER MECHANISM IS BY A MANUALLY OPERATED AIR SWITCH, OR BY AN OPTIONAL AUTOMATIC SHAKER CONTROL. DUST REMOVED BY THE SHAKING PROCESS IS DEPOSITED IN THE DUST SUMP. DUST AND BLASTING BY-PRODUCTS ARE EASILY REMOVED FOR DISPOSAL BY A SLIDE VALVE LOCATED AT THE BOTTOM OF THE SUMP.
Fill Door: to add media to machine and remove debris from debris screen basket inside reclaimer.
Sump Hose: 4" flexible duct hose, from machine sump outlet to reclaimer inlet.
Media Valve: Universal feed allowing all types of abrasives to be used. 2" plug outlet for easy clean out.
Media Hose: 1/2" media hose, from media valve to bottom fitting on blast gun.
Compressed Air Inlet: 1/2" coupler for easy installation of optional moisture trap.
Mylar Dispenser: Holds roll of mylar to protect viewing window. (not shown).
DIMENSIONS: 44" WIDE X 36" DEEP X 72" TALL