Call us at 1-888-853-9992
Cart 0
18' Frametech Tube Design Machine w/ Self Piercing Aluminum Rivet Gun Combo

18' Frametech Tube Design Machine w/ Self Piercing Aluminum Rivet Gun Combo

$ 10,599.00

FR-18-T  Frame Machine with Self Piercing Aluminum Rivet Gun


In Stock  

This model comes in an 18' in length (FR-18-T)  frame machine. The FR-18-T tilt bed frame rack is a high quality, durable frame straightening machine designed to accommodate full-frame or uni-body vehicle with 7,7000 lb. lighting capacity. The two 10-ton "clear floor" pulling towers with 360 degree pulling capability and almost unlimited height and angle adjustment. The machine deck offers multiple precision cut tie-down/down pull locations with a universal anchoring system with adjustable height clamping assemblies.The FR-18 also comes standard with a pulling chain on each tower, roof/up pull attachment, universal wheel stands & dead car dollies.


  • Tube Steel Design
  • Tilt Bed
  • Clear Floor
  • 360 degree pulling capability with universal anchoring.
  • Designed to repair full-frame or uni-body vehicles
  • Hydraulic tilt bed with 7,7000 lb. lifting capacity
  • Durable, heavy-duty constructions with powder coat finish
  • Universal anchoring system with adjustable height pinchweld assemblies
  • Clear Floor, 360 degree pulling capability
  • Multiple tie-down/down pull locations
  • 2 10-ton 360 degree round pulling towers
  • Adjustable tower collars-adjust pulling height/angle by a fraction on an inch.
  • Quick disconnect hydraulic fitting & hose connection
  • Drive-on ramps


  • 18' (FR-18-T) frame machine bed available
  • (4) Pinchweld assemblies with clamps
  • (2) 360 degree "clear floor" pulling towers w/10 ton hydraulics
  • (2) Air/Hydraulic pumps with pressure gauge
  • (3) 10 ton hydraulic rams
  • (2) Pull chains with hooks
  • (2) Wheel stands
  • (2) Dead car dolly
  • (1) Roof/up pull attachment

M1M-SR830 Self-Piercing Aluminum Rivet Gun  

Riveter comes with 1 arm, 1 charger, 2 batteries, 1 die kit, 1 work sling, 
Fully furnished to meet various needs.
2 lithium batteries to save charging time and increase work efficiency 
Rechargeable, Portable, Easy to Handle, Alarm Alert, Ergonomic design and good look with a good balance.
Actuation Method: Electro-Hydraulic
C-Frame Throat Depth: 1.4"
Weight: 22lbs - 24lbs 
One Time Charge Can Rivet: 300 Rivets
Battery Charging Time: 3 Hours
Adjustable Setting Force: 3.3T-5.6T
Motor Voltage: 18vdc

Share this Product

More from this collection

18' Frametech Tube Design Machine w/ Self Piercing Aluminum Rivet Gun | m1mequipment ... ... ...


Sold Out