Call us at 1-888-853-9992
Cart 0
Launch TLT210-XT 10K Clear Floor Asymmetric - ALI/ETL Certified

Launch TLT210-XT 10K Clear Floor Asymmetric - ALI/ETL Certified

$ 4,700.00

Multi-purpose full asymmetric lift that is height and width adjustable and may be installed in a standard or rotated column configuration to accommodate the smallest cars tor largest SUV's and trucks.  This ALI/ETL certified lift comes with a one (1) year limited warranty. Lift comes in red or blue. 

  • Adjustable Column Height - Provides an extra 6” of height adjustment for ease of installation with various ceiling heights.
  • Adjustable Column Width - Provides extra 6” of width adjustment for narrow service bays to custom fit your shop.
  • Single Point Lock Release - Allows technicians to disengage both column locks simultaneously.
  • Rubber Door Guards - Provides added security against door damage.
  • Stackable Foot Pad Extensions - Extra tall applications are no problem with the two 6” tall and two 3” short extensions.
  • Outer Hose Guards - Protects hydraulic hoses from damage.
  • Heavy-Duty Arm Restraint System - Oversize rugged steel gears, pins, and springs for trouble free operation.
  • Double Telescoping Screw Pads - Used with or without rubber pads offering 6.5” adjustment for complete vehicle coverage.
  • Standard Asymmetric - Lift installed with columns facing each other.
  • Rotated Asymmetric - Lift installed with columns offset - rotated.


Specification TLT210-XT Standard TLT210-XT Rotated
Maximum Lifting Height 76.4” (1940mm) 76.4” (1940mm)
Minimum Column Height 143” (3634mm) 143” (3634mm)
Cylinder Full Height 145.2” (3688mm) 145.2” (3688mm)
Total Width 136.6” (3470mm) 137.9” (3502mm)
Drive-thru Clearance 98.4” (2500mm) 92” (2338mm)
Floor to Overhead Switch 140” (3556mm) 140” (3556mm)
Front Arm Reach min/max 23.6” (600mm) / 43.5” (1105mm) 23.6” (600mm) / 43.5” (1105mm)
Rear Arm Reach min/max 38.6” (980mm) / 61.8” (1570mm) 38.6” (980mm) / 61.8” (1570mm)
Screw Pad Height 4” (101mm) to 7.5” (190mm) 4” (101mm) to 7.5” (190mm)
Inside Column Width 110.2” (2800mm) 101.9” (2588mm)
Motor 2 HP 2 HP
Voltage 208-230 Volt/60 Hz/ 1-Phase 208-230 Volt/60 Hz/1- Phase
Rise Speed 54s 54s
Max. Load Per Arm 2500 lbs (1134 Kilos) 2500 lbs (1134 Kilos)
Min. Ceiling Height Required 143.5" (3644mm) 143.5” (3644mm)
Narrow Bay Setting Deduct 5.9” (149mm) Deduct 5.9” (149mm)
Maximum Column Height 149” (3874mm) 149” (3874mm)
Capacity 10,000 lbs 10,000 lbs
Ship Weight 1,570 lbs 1,570 lbs
Ship Dimensions 110”L x 24”W x 48”H 110”L x 24”W x 48”H

 

Local Pick-up (Reidsville, NC):  N/A....Launch Lifts are shipped out of Texas. 

Shipping / Receiving:  Offloading of the delivery truck is the responsibility of the customer.  A forklift or similar vehicle is required to unload the lift.  Residential delivery is an additional $150 charge by the freight carrier.

TLT-210 Flier: Click Here

TLT-210/211 Manual: Click Here 

.

Share this Product


More from this collection

Launch TLT210-XT 10K Clear Floor Asymmetric - ALI/ETL Certified | m1mequipment ... ... ...
Sale

Unavailable

Sold Out